Hardwood Floor Sanding and Scratches

Floor sanding is an important part of refinishing wood floors. The process, also called “floor sanding” or “floor coating,” is necessary to restore the original lustre of wood floors and give them a new lease on life. Floor sanding is the procedure of sanding the surfaces of your floor with specialised abrasive substances. When floor sanding Adelaide, you mustn’t hurt yourself or others. Thus, ensure to follow all of the safety precautions and recommendations outlined below.

floor sanding AdelaideTo properly perform floor sanding, you will need A floor buffing machine, floor sandpaper, a power washer, a sanding block, and a few hand tools for doing the work. You may also need a power sprayer, especially if you plan to go over large areas or use a large buffing machine. Other things that you will need to rent or purchase include: A dust mask, protective eyewear, a respirator, a face mask designed specifically for floor sanding, brushes, a hammer, sandpaper, a spirit level, a tape measure, and a friend or co-worker who can give you helpful advice or help you get started.

If you have never done floor sanding Adelaide before, you should begin by applying the first coat of sandpaper to a clean workspace. It is best to have someone else help you hold the tool and sandpaper while working. Most buffing machines come with instructions or guides that show you how to apply the sandpaper properly. After you have finished applying the first coat, you will then be ready for the next.

For each floor surface, use a grit size as described in the manufacturer’s instructions. The size of the grid is determined by the thickness of the material and the typical dents and scratches that you might expect to find. Most wood flooring surfaces are fairly flat, although there may be a few slight curves. When floor sanding Adelaide, use light to medium-grit sandpaper to avoid the possibility of dulling the area. If the surface has many crevices or is unique in shape, it is best to use a grit size that is slightly larger than the actual tooth measurement.

After you have finished sanding the floor, you will need to clear away any debris you may have missed during the sanding process. Use a rag or floor-sweeping cloth to wipe away any excess sand that you might have missed. It is important always to dry the floor surface with a waterborne finish. This type of finish is much easier to clean up and does not require an extra clean up session.

If you find that you have many scratches on your floors, you can purchase a floor buffer to eliminate the scratching problem. Buffers work by pressing the sandpaper firmly against the surface and transferring it to the back of the scratches. They can significantly reduce the number of scratches that are left on your floors. However, before you invest in a buffer, it is a good idea to buff your hardwood floors first to ensure that the floor buffer will not affect the durability of your floors.